Leica Geosystems Leica mojoXact Plus - Manual (Page 94)

94 Guidance, Leica mojoXact Plus
The Save Wayline screen appears. Enter a name of up to 17 characters (including
spaces) for the wayline, and select to return to the main navigation screen.
The wayline is now active and ready for use.
OR
• to use the wayline without first saving it and return to the main navigation
screen, select .
7.3 Pivot Guidance
General informa-
tion
Setting pivot guid-
ance, step-by-step To set up pivot guidance, carry out the following steps:
In pivot guidance, working lines are concentric
circles and are defined by setting three waypoints.
When the vehicle reaches the end of each working
line (circle), the operator must disengage the auto-
steer (usually by turning the steering wheel or
using the auto-steer button) and move the vehicle
to the next working line (circle) before engaging
the auto-steer again.
1. On the main navigation screen, select the Guidance button.
The Guidance menu appears.
2. Select the Set Pivot button.
The Set Pivot menu appears.
3. Position your vehicle in the field at the position where you want to
start (waypoint A), and select the Set A button.
The main navigation area of the screen shows where the starting
waypoint is. The second and third waypoints (B and C) are grey
indicating that the vehicle has not travelled far enough yet to set
them.