Leica Geosystems Leica mojoXact Plus - Manual (Page 108)

108 NMEA Output, Leica mojoXact Plus
To cancel the selection of the checkbox and return to the System Settings menu,
select .
6. Change the Baud Rate (if necessary) to the value appropriate for your applica-
tion by selecting the value from the list.
7. For each NMEA sentence either select Off so it is not output, or the output rate
required in the Rate list.
8. To proceed to the second NMEA 0183 Settings screen, select .
If an output rate is selected that is not compatible with the selected baud rate,
an error appears at the bottom of the screen and you cannot proceed until
compatible values are selected for the baud rate and sentence output rates, and
the error is cleared.
To cancel the changes to the values and return to the NMEA Settings screen,
select .
9. For each NMEA Sentence on the second NMEA 0183 Settings screen, either select
Off so it is not output, or the output rate required in the Rate list.
10. To proceed to the Advanced NMEA Settings screen, select .
If an output rate is selected that is not compatible with the baud rate, an error
appears and you cannot proceed until compatible values are selected for the
baud rate and sentence output rates, and the error is cleared. The Advanced
NMEA Settings screen then appears.