Leica Geosystems Leica mojoXact Plus - Manual (Page 20)

20 Running the mojoXact Plus for the First Time, Leica mojoXact Plus
3 Running the mojoXact Plus for the First Time
This chapter details how to start the mojoXact Plus and steps the operator through
the setup wizard that executes when the mojoXact Plus, attached to a third-party
terminal, is started for the first time. For information on what happens when a
mojoXact Plus attached to a mojo3D is started for the first time, refer to the Leica
mojo3D User Manual.

Please ensure that your mojoXact Plus system has been installed in accord-
ance with the installation instructions in Chapter "2 System Installation".
3.1 Starting Up
mojoXact Plus and
third-party
terminal system If the system has a mojoXact Plus connected to a third-party terminal, during instal-
lation, the mojoXact Plus power cable should have been wired into the vehicle’s igni-
tion. When the vehicle is started, the mojoXact Plus is powered up and starts. Refer
to the third-party terminal’s documentation for instructions on how to start it up.
If this is the first time that the mojoXact Plus/third-party terminal system has been
started, the Universal Terminal Unlock screen appears and the operator must enter
the unlock code to enable the universal terminal features in the mojoXact Plus. Refer
to Section "3.2 Universal Terminal Unlock Code" for details on the unlock code and
the initial setup wizard that steps you through the process of setting up your system.
If the mojoXact Plus/third-party terminal system has been started before and the
universal terminal unlock code successfully entered, then the main navigation screen
appears. Refer to Section "3.4 Main Navigation Screen" for an explanation of the
main navigation screen and the functionality it provides.
3.2 Universal Terminal Unlock Code
To use the mojoXact Plus with a third-party terminal, the universal terminal features
of the mojoXact Plus must be enabled. To do this, the operator must purchase an
unlock voucher from their dealer and then redeem the voucher to acquire the unlock
code.
For instructions on how to redeem the voucher and acquire your universal terminal
unlock code, refer to "Appendix A Redeeming a System Option Voucher".
Loading the unlock
code There are two ways to load the universal terminal unlock code onto the
mojoXact Plus. You can either enter the unlock code at the Universal Terminal Unlock
screen or you can have the mojoXact Plus automatically load the unlock code from a
USB memory key.
When the mojoXact Plus/third-party terminal system is turned on for the first time,
the Universal Terminal Unlock screen, shown below, appears.