Eagle quantum premier config – Det-Tronics S3 Graphics User Manual
Page 107
11-26
EAGLE QUANTUM PREMIER CONFIG.
Version 6.0
EAGLE QUANTUM PREMIER CONFIG.
Output Configuration Screen Details
The left hand pane uses a scrolling list with three columns to display the configured outputs and allow for their
editing.
The first column “#” contains the slot number for the outputs in the database. In the example above, the first
three slots are configured.
The second column contains the “Tagname” that is used within the database to identify the item. This tagname
will be used throughout the S
3
environment, and specifically within the graphic editor when assigning these
outputs to user configured buttons.
The third column “Source Tagname” displays the tagname of the device that the output is associated with
followed by the command function. In the highlighted example of slot 3 above, the source is UVIR-013 and the
command function is “Start Manual Oi Test”. This is then represented in the output list as;
UVIR-013.Start Manual Oi Test
The six buttons at the bottom of the Outputs pane perform the following functions:
Edit
opens the “Output Editor” dialog box to allow an output to be configured for slot selected.
Copy
allows a selected slots’ configuration to be copied for pasting into another slot to speed up the configuration
of similar outputs.
Paste
used with “Copy” above, allows a copied slots configuration to be pasted into the selected slot to speed
up the configuration of similar outputs.
COMMAND BAR • OUTPUTS