Det-Tronics S3 Graphics - Manual (Page 148)

12-33 EAGLE QUANTUM PREMIER DEVICES
Version 6.0
X5200
Ultraviolet (UV) / Infrared (IR) Flame Detector
The UVIR X5200 is located on the LON/SLC and provides UVIR Optical Flame detection capability for the Eagle
Quantum Premier system. The UVIR X5200 meets the most stringent requirements worldwide with advanced
detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The
detector is equipped with both automatic and manual Oi test capability. The detector has Division and Zone
explosion-proof ratings and is suitable for use in indoor and outdoor applications.
Tagname
Configuration of the detector is through the “UVIR Flame Detector (X5200) Editor...” dialog box which contains
controls for manipulating all of the adjustable parameters of the detector. This includes processing and
sensitivity adjustments for both of the sensors along with some global settings for alarm action, Oi, time delays
and deadband. The tagname at the top of the dialog box refers to the flame detector as a whole and is the
identifier used for programming. Until a tagname is entered the detector is not available in the S 3 database for
programming, monitoring or dynamic graphic purposes.
UV/IR OPTICAL FLAME DETECTOR (X5200)