Det-Tronics S3 Graphics - Manual (Page 210)

12-95 EAGLE QUANTUM PREMIER DEVICES
Version 6.0
Relay Module
8 channel relay module
The 8 Channel Relay Module consists of eight individually configured output channels. Each output channel
drives a Form-C relay.
Note
the relay module only supports equipment that operates on 24 Vdc/Vac (not to exceed 2amperes) at each
output channel.
The relay module has two LEDs for the device and two LEDs for each channel.
On the device level, one green LED indicates power, while the other yellow LED indicates a LON communication
fault.
For each channel, one red LED indicates channel activation and the other yellow LED indicates a fault
condition.
Tagname
The tagname at the top of the dialog box refers to the entire module. Each of the eight channels also require a
tagname and until one is entered, that channel is not available in the S 3 database for programming, monitoring
or dynamic graphic purposes.
RELAY MODULE