Eqp logic editor – Det-Tronics S3 Graphics User Manual
Page 243
13-18
EQP LOGIC EDITOR
Version 6.0
EQP LOGIC EDITOR
In the example to the right, the “LON” item has been expanded by
clicking on the “+” sign and now shows ten subordinate items, each of
which is a field device.
As these additional items are revealed, the list extends beyond the
bottom and becomes scrolling.
The hierarchical arrangement of items provides an easy and logical
method of accessing the thousands of potential items that could be
configured as outputs on a large premier system.
In the example below, a field device on the LON, an UVIR Fire Detector
with the tagname “UVIR-013” has been selected and “opened” to display
its subordinate data. Any of the displayed items can be selected and
configured for “movement” to the MB system utilizing the “drag and
drop” method.
To configure a data point for
“movement” click and “drag” the
selected point to the right side of
the dialog box and “drop” it on
the desired Modbus destination
address.
In the above example, the “Fire
Alarm” point is in the process
of being moved to the selected
destination address “40001/1” in
the MB table.
Once “dropped” in the desired cell
in the “Source” column on the right side of the dialog box, the “Fire Alarm” status for “UVIR-013” will now map to
the first “bit” of register 40000, Modbus destination address of “40001/1”.
This process must be
repeated for all data to be
shared with the MB host
device.
LOGIC EDITOR • CONTROLLER MENU