Det-Tronics S3 Graphics - Manual (Page 25)

3-2 PORTS
Version 6.0
The available choices are based on the S 3 hardware key plugged into the computer, and only supported systems
or devices are darkened.
“Not Configured” is the default selection, simply select the radio button for the type of port to be created and
click OK. This will open the main configuration screen for the selected port type. Clicking Cancel will return to
the Port Configurations dialog box without any change.
Note
Refer to the appropriate section of this manual for details on specific port type configurations.
From the main configuration screen for the selected port type, choose “Exit” to return to the Port Configuration
screen.
Note
New port types are constantly under development. Information on new port type support and the latest
information on S 3 updates can be obtained through the Detector electronics website at www.det-tronics.com.
PORT CONFIGURATION