Eqp logic editor – Det-Tronics S3 Graphics User Manual
Page 238
EQP LOGIC EDITOR
13-13
EQP LOGIC EDITOR
Version 6.0
In the example to the right, the “LON” item has been expanded by clicking
on the “+” sign and now shows ten subordinate items, each of which is
a field device.
As these additional items are revealed, the list extends beyond the bottom
and becomes scrolling.
The hierarchical arrangement of items provides an easy and logical
method of accessing the thousands of potential items that could be
configured as outputs on a large premier system.
In the example below, a field device on the LON, an Agent Release
Module with the tagname “ARM-015” has been selected and “opened” to
display its subordinate data. Any of the displayed items can be selected
and configured for “movement” to the AB system utilizing the “drag and
drop” method.
To configure a data point for “movement”
click and “drag” the selected point to
the right side of the dialog box and
“drop” it on the desired Allen Bradley
destination address.
In the example below, the “Channel
Active” point is in the process of being
moved to the selected destination
address “B20/0” in the AB table.
Once “dropped” in the
desired cell in the “Source”
column on the right side of
the dialog box, the “Channel
Active” status for “ARM-015”
will now map to the Allen
Bradley destination address
of “B20/0”. This process
must be repeated for all
data to be shared with the
AB host device.
LOGIC EDITOR • CONTROLLER MENU