Det-Tronics S3 Graphics - Manual (Page 266)

EQP LOGIC EDITOR 13-41 EQP LOGIC EDITOR
Version 6.0
Control Panel Toolbar
There are three icons which provide shortcuts to menu items having to do with logic and the controller.
These three icons from left to right are; Download, Monitor and Simulate.
Download
When this icon is selected and the project has been “built” and no errors were discovered then the
program is transferred to the controller. If a valid build is not found then a “build” is performed and if
no errors are discovered the program will be downloaded to the controller.
Monitor
When connected to a controller and the project matches the program in the controller, the logic of
the program can be monitored. In the monitor mode, the logic sheet is displayed on screen and the
results of all function block bins can be viewed.
Simulate
If the project has been “built” and no errors were discovered then the program can be simulated on
the S 3 workstation. If a valid build is not found, the build is automatically performed and if no errors
are found the simulation is started.
LOGIC EDITOR • TOOLBARS MENU LOGIC EDITOR • TOOLBARS MENU