Det-Tronics S3 Graphics - Manual (Page 86)

EAGLE QUANTUM PREMIER CONFIG. 11-5 EAGLE QUANTUM PREMIER CONFIG.
Version 6.0
Globals
Provides access to configuration services allowing defined global memory values to be set up for tracking by
the DCD.
Once configured, these globals can be logged and/or printed by the event monitor.
NOTE
Global memory points cannot be configured from this location. Global memory point creation and
configuration is done within the controllers logic editor.
To configure a global memory point for monitoring, select a “slot” from the “Monitored Globals” pane on the left
side of the dialog box and then select the “Edit” button.
This will open a dialog box displaying all configured global
memory points that are available for monitoring.
In the example to the right, two points are available.
Choose the desired point and select “OK” to access the
configuration dialog box for the point.
COMMAND BAR • GLOBALS COMMAND BAR • GET REVISION