Det-Tronics S3 Graphics - Manual (Page 291)

13-66 EQP LOGIC EDITOR
Version 6.0
Item Descriptions
Item 1 - Firmware ID String
The controller automatically polls LON devices for an ID string. The ID string contains an abbreviated device
name and firmware version. As an example, “DCU 3.01” is the ID string for a DCU. The first three characters
hold the device ID and the last 5 characters hold the firmware version. In multi processor units like the Eclipse
and X3301 this represents the version of the software running on the neuron chip. For the controller, this variable
holds the version of the main program, not the neuron firmware. Firmware version is used to determine device
type and available functionality.
Item 2 - Neuron ID number
Each neuron holds a unique 48 bit “Neuron ID” number. Neuron ID numbers could be used as an alternative
method to dip switch addressing in a future version.
Item 3 - Firmware Version
The firmware version is represented as a floating-point number. In multi processor units like the Eclipse and X3301
this represents the version of the software running on the main processor, not the neuron chip.
Item 4 - Serial Number
This location holds a unique serial number used for device identification.
Item 5 - Manufacture Date
Date of device manufacture.
Item 6 - OEM Device Code
This code is used to synchronize software features to a customer. This item can only be set at the factory by the
controller final test fixture. It is not part of the user configuration.
Device Codes
Value Description
0 Detector Electronics
1 Solar Turbines
DEVICE ITEM NUMBER DESCRIPTIONS