Det-Tronics S3 Graphics - Manual (Page 256)

EQP LOGIC EDITOR 13-31 EQP LOGIC EDITOR
Version 6.0
Settings
This menu item opens a dialog box where logic pages are given a “title” that appears in the title bar of the window
for the drawing sheet, and a size and orientation for the drawing sheet can be selected. The “Sheet Settings...”
dialog box will list all existing sheets that have been created for an element (program or function block) along
with seven buttons for “sheet management” purposes.
Size
A pull down menu to the right of the sheets title allows for the selection of the logic sheets size and orientation.
Engineering drawing sizes ranging from “A” to “D” can be selected in either a Landscape (Horizontal) or Portrait
(Vertical) orientation. In the example below, “B-Landscape” is selected which creates a sheet 17” wide by 11.5”
high.
Append
This button will create a new sheet at the end of the list of existing sheets. On selection, a dialog box will open
allowing the new sheet to be named upon creation.
Delete
This button will remove a selected sheet from the element. This cannot be “undone” and should be used with
caution!
Insert
This button will create a new sheet after the sheet currently highlighted in the list of existing sheets. On selection,
a dialog box will open allowing the new sheet to be named upon creation.
LOGIC EDITOR • SHEETS MENU