Det-Tronics S3 Graphics - Manual (Page 33)

4-6 START MONITORING
Version 6.0
Data Tables
The data tables show users the current information about addresses and bits being read from attached systems
stored in specific serial tables of a port.
This feature is typically used by maintenance personnel to determine if the selected port is reading the correct
addresses and to do detailed troubleshooting.
Some port types allow for the configuration and polling of multiple data tables. All configured data tables are
available for viewing by pressing the appropriate button at the lower left of the screen.
An “Acknowledge” button is provided to allow alarms and events to be acknowledged without leaving the data
table screen.
ONLINE DATA TABLES