Det-Tronics S3 Graphics - Manual (Page 173)

12-58 EAGLE QUANTUM PREMIER DEVICES
Version 6.0
EAGLE QUANTUM PREMIER DEVICES
Point Display
The UVIR EQ2200 has a custom “Point Display” that can be accessed from either the Point Display button on the
Command Bar or from the Online Mode. The point display provides a single window view of all available real-time
data for the device.
Alarm Logs
The top right quadrant of the display shows the last eight alarms with their date and time data.
Analog Input Track
The top left quadrant shows a dynamic 60 second history of the measured variable (UV counts or IR level) for
the detector. The input track scrolls from left to right with the most current data at the “pen” on the left margin.
The display updates once every five seconds. Only one of the two PV’s (UV or IR) can be displayed at a time,
used the “Select UVIR” buttons on the center right side of the display to toggle between displaying UV Counts as
shown in the example above, or, the IR sensors level.
Status & Diagnostics
The middle portion of the point display shows the discrete status and health indicators for the detector.
Buttons
There are six buttons that can send commands to the detector including; Remove, Inhibit, Reset, Select UV,
Select IR and Manual Oi.
EQ2200UVIR • POINT DISPLAY