Det-Tronics S3 Graphics - Manual (Page 254)

EQP LOGIC EDITOR 13-29 EQP LOGIC EDITOR
Version 6.0
Simulate
If the project has been “built” and no errors were discovered then the program can be simulated within the
S 3 environment. Simulation allows for program testing and debugging without the need for an actual Eagle
Quantum Premier controller being attached to the S 3 workstation.
Below is an example of a program in the “simulation” mode.
When the simulator is running, the value for each logic element is displayed on the screen to the right of the
element. Inputs can be directly manipulated and variables can be modified as well.
LOGIC EDITOR • PROJECT MENU