Det-Tronics S3 Graphics - Manual (Page 82)

11-1 EAGLE QUANTUM PREMIER CONFIG.
Version 6.0
EQP Configuration
One of the supported communication port types is for the Detector Electronics Corporation “Eagle Quantum
Premier” fire & gas system.
System configuration consists of three major phases.
Identifying all of the devices on the network. •
Configuring the operating parameters of each of these devices. •
Downloading the configuration data over the network to the devices. •
NOTE
Prior to configuration, ensure communication with the Eagle Quantum Premier controller is established.
Reference the “Ports” (Section 3) area of this users guide on establishing serial communications.
Enter the Eagle Quantum Premier configuration screen by either double-clicking on the port button or by selecting
the port and then choosing “Configure” from the buttons on the right of the Ports screen.
EQP CONFIGURATION