Det-Tronics S3 Graphics - Manual (Page 274)

EQP LOGIC EDITOR 13-49 EQP LOGIC EDITOR
Version 6.0
Select 6. NOT and click “OK”.
The cursor will change to a miniature function block symbol when positioned within the drawing area
of the current sheet.
Place the “NOT” function on the sheet by positioning the mouse cursor over the sheet and clicking the left mouse 7.
button.
The cursor will return to the “Arrow” symbol and this tool can be used to move the placed function
to the desired location on the sheet. It may also be moved using the arrow keys.
Click on the “Output Variable” icon on the Gates Toolbar. 8.
The cursor will change to a miniature output variable symbol when positioned within the drawing area
of the current sheet.
Place the Output Variable on the sheet by positioning the mouse cursor over the sheet and clicking the left mouse 9.
button.
Once all three logic operators are placed on the sheet, they must be connected together before the program can
be considered finished and ready to be compiled.
Connecting Logic Operators
Inputs, outputs, constants, functions,
function blocks, etc. can be connected to
each other either directly or by using “wires”.
In the example to the right, connections must be made between the input, output and NOT gate.
Direct Connection
To use the “direct connect” method, use the mouse to select the Input Variable and drag it to the right until its
output connector mates with the NOT gates input connector as shown below.
At this point, the S 3 has linked the Input Variable
to the input of the NOT gate and moving the Input
Variable away with the mouse will automatically
create a “wire” to keep the connection, as shown
to the left.
LOGIC CREATION LOGIC CREATION