Det-Tronics S3 Graphics - Manual (Page 81)

10-6 USER LOG IN & OUT/ACCOUNTS
Version 6.0
If “restricted access” is combined with “configure system” the user can also create project backups using the
“Backup/Restore” utility and view the LON configuration of an EQP port but cannot edit or view the LON devices
details.
If combined with “Quit Online operations” a restricted access user could log in while the graphics environment
was online, be able to navigate the graphics and be able to quit the graphics environment returning to the
configuration environment and the view and document the project as described above but not be able to make
changes or return online.
Passwords
After the selection of the options assigned to the user, a user password must be created. This password is used
to log on to the system at startup or when online during shift changes etc.
Select the “Password” pushbutton to access the “Password” dialog box. The password must first be entered into
the “Enter password:” field and then again into the “Verify password:” field to validate the entry.
NOTE
Only the Administrator may change passwords.
If a password is lost it cannot be retrieved and the user
account must be deleted and then recreated as a new
user.
Change Name
This button allows a users login name to be changed
without effecting the account configuration. For
instance “Operator” could be changed to “John Doe”
while retaining the password and privileges previously
configured.
CREATING A NEW USER