Det-Tronics S3 Graphics - Manual (Page 272)

EQP LOGIC EDITOR 13-47 EQP LOGIC EDITOR
Version 6.0
The “Gate Settings...” dialog box provides a scrolling pull-
down menu from which the number of inputs can be adjusted
anywhere between Two (2) and Thirty Two (32).
In the examples above and to the left, eight inputs were
selected and then inputs Two (2), Four (4) and Six (6)
were inverted by clicking on the “NOT Enable” checkbox
corresponding to those inputs. In addition, the output was
inverted in the same manner.
Once these selections were made, clicking on the “OK” button closes the “Gate Settings...”
window and the re-configured function appears as in the example to the left.
Note the small circles on the output and input “pins” indicate that these signals are
“Inverted” from their normal state.
Non-Extensible Functions
These functions have a single non expandable input. One example of a non-extensible
function is the boolean “NOT” gate, as shown in the example to the right. A single input
with a single output.
LOGIC CREATION • DEFINITIONS LOGIC CREATION • DEFINITIONS