Det-Tronics S3 Graphics - Manual (Page 42)

6-3 LOGS
Version 6.0
Configuration Logs
Below is a sample configuration log. Running down the right hand side is the log name (which is the date),
navigation buttons, a button to select a different log for viewing, the page indicator for the currently viewed log,
a print button and an exit button.
The purpose for the configuration log is to provide an audit trail for safety related changes to the system. By
examining the configuration log it can be determined if tagnames were changed, if alarm setpoints were changed
in the detector configurations, and if these changes were downloaded to the system or not.
The log is formatted in three columns, the first contains the time, the second the date and the third a description
of the change.
The change column may use two lines to log the change. In these cases the first line contains the port number,
point number, and tag name. The second line contains the description of the change.
NOTE
The configuration log tracks changes related to operation and safety only. Changes to graphics are not
logged.
ALARM LOGS CONFIGURATION LOGS