Det-Tronics S3 Graphics - Manual (Page 133)

12-18 EAGLE QUANTUM PREMIER DEVICES
Version 6.0
EAGLE QUANTUM PREMIER DEVICES
User Levels
The “User Level Editor...”
provides a means for limiting
access to the “Acknowledge”,
“Remove”, “Manual Oi”, “Inhibit”,
“IR Calibration”, “Manual Oi
(FIRE)” and “Reset” buttons
for the module which are accessible from the devices point display. The default
value is “0” and provides access to all users.
Change these values to match a user account configuration and security needs.
Point Display
The MIR X3301 has a custom “Point Display”
that can be accessed from either the Point
Display button on the Command Bar or from
the Online Mode.
The point display provides a single window
view of all available real-time data for the
device.
Alarm Logs
The top right quadrant of the display shows
the last eight alarms with their date and time
data.
Analog Input Track
The top left quadrant shows a dynamic 60 second history of the measured variable (IR counts) for the detector.
The input track scrolls from left to right with the most current data at the “pen” on the left margin. The display
updates once every five seconds.
Manual Oi Log
The bottom left quadrant of the point display shows the detectors manual Optical Integrity (Oi) log. The last eight
manual tests are shown with the date, time and a PASS/FAIL indicator.
Status & Diagnostics
The middle portion of the point display shows the discrete status and health indicators for the detector.
Buttons
There are six buttons that can send commands to the detector including; remove, inhibit, reset, Manual Oi,
Manual Oi (FIRE) and IR Calibration.
MIR X3301 • USER LEVELS