Det-Tronics S3 Graphics - Manual (Page 99)

11-18 EAGLE QUANTUM PREMIER CONFIG.
Version 6.0
EAGLE QUANTUM PREMIER CONFIG.
Outputs
Tags linked to commands to be sent to the controller or field devices on the LON are configured here.
Each “output” is a tag in the DCD database that references a command or controls a memory location within the
Premier controller.
Select the “Outputs” button from the command bar to access the configuration screen.
The screen is divided into two sections, Outputs & Configuration. On the left side the outputs pane consists of
a scrolling list showing all configured output tags in the database. Below the list are buttons for creating and
maintaining the tag list.
On the right side is the configuration pane which will show the details of any selected output from the list.
COMMAND BAR • OUTPUTS