Altera RapidIO II MegaCore Function - Manual (Page 181)

Chapter 6: Software Interface 6–43
Transport and Logical Layer Registers
August 2014 Altera Corporation RapidIO II MegaCore Function
User Guide
0x31C Logical/Transport Layer Control Capture
0x328 Port-Write Target Device ID
0x32C Packet Time-to-Live
0x340 Port 0 Error Detect
0x344 Port 0 Error Rate Enable
0x348 Port 0 Attributes Capture
0x34C Port 0 Packet/Control Symbol Capture 0
0x350 Port 0 Packet Capture 1
0x354 Port 0 Packet Capture 2
0x358 Port 0 Packet Capture 3
0x368 Port 0 Error Rate
0x36C Port 0 Error Rate Threshold
Table 6–65. Error Management Extensions Register Map (Part 2 of 2)
Address Name
Table 6–66. Error Management Extensions Block Header—0x300
Field Bits Access Function Default
EF_PTR [31:16] RO
Hard-wired pointer to the next block in the data structure, if one exists.
The value of this field is determined by the Extended features pointer
parameter in the RapidIO II parameter editor.
16’h0000
EF_ID [15:0] RO Hard-wired extended features ID. 16'h0007
Note to Table 6–66 :
(1) The value of this field is determined in the RapidIO II parameter editor.
Table 6–67. Logical/Transport Layer Error Detect CSR—Offset: 0x308 (1) (Part 1 of 3)
Field Bits Access Function Default
IO_ERROR_RSP (2) [31] RO (1) Received a response of ERROR for an I/O Logical Layer Request. 1'b0
MSG_ERROR_RESPONSE (2) [30] RO (1)
Received a response of ERROR for a MSG Logical Layer Request.
Set when the RapidIO II IP core detects this situation or when the
message_error_response_set
input signal changes value
from 0 to 1.
1'b0
GSM_ERROR_RESPONSE (2) [29] RO (1)
Received a response of ERROR for a GSM Logical Layer Request.
Set when the RapidIO II IP core detects this situation or when the
gsm_error_response_set
input signal changes value from 0
to 1.
1'b0
MSG_FORMAT_ERROR (2) [28] RO (1)
Received MESSAGE packet data payload with an invalid size or
segment. Set when the RapidIO II IP core detects this situation
or when the message_format_error_response_set input
signal changes value from 0 to 1.
1'b0
ILL_TRAN_DECODE [27] RO (1)
Received illegal fields in the request/response packet for a
supported transaction. Set when the RapidIO II IP core detects
this situation or when the illegal_transaction_decode_set
input signal changes value from 0 to 1.
1'b0