Altera Video and Image Processing Suite - Manual (Page 139)

Parameter Value Description
dout0: Color planes in parallel 1, 2, 3, 4 Select the number of color planes in parallel
for input port
dout0
.
dout0: Halve control packet
width
On or Off Turn on to halve the Avalon-ST Video
control packet width for output port
dout0
.
Turn on this parameter when stream contains
two subsampled channels.
Note: For other IP cores to be able to
treat these channels as two fully
sampled channels in sequence, the
control packet width must be
halved.
This option can be useful if you want to split
a subsampled color plane from a fully
sampled color plane. The subsampled color
plane can then be processed by other
functions as if fully sampled.
dout1: Port enabled On or Off Turn on to enable input port
dout1
.
dout1: Non-image packet source • din 0
• din 1
• din 0 and din 1
Select the source port(s) that are enabled for
non-image packets for output port
dout1
.
dout1: Color planes in sequence 1, 2, 3, 4 Select the number of color planes in sequence
for input port
dout1
.
dout1: Color planes in parallel 1, 2, 3, 4 Select the number of color planes in parallel
for input port
dout1
.
dout1: Halve control packet
width
On or Off Turn on to halve the Avalon-ST Video
control packet width for output port
dout1
.
This option can be useful if you want to split
a subsampled color plane from a fully
sampled color plane. The subsampled color
plane can then be processed by other
functions as if fully sampled.
Color Plane Sequencer Signals
Table 9-2: Signals for Color Plane Sequencer IP Core
Signal Direction Description
clock
Input The main system clock. The IP core operates on the rising
edge of this signal.
UG-VIPSUITE
2015.05.04
Color Plane Sequencer Signals 9-5
Color Plane Sequencer IP Core Altera Corporation
Send Feedback