Altera Video and Image Processing Suite - Manual (Page 16)

Table 1-6: Performance and Resource Data Using Cyclone V Devices
The following data are obtained through a video design example using a Cyclone V device (5CGTFD9E5F35C7).
The general setting for the design is 8 bits per color plane. The target f
MAX
is 100 MHz.
IP Core Configuration ALM RAM DSP
2D FIR Filter
• Number of color planes in sequence = 3
• Filter size = 3×3
• Runtime control = On
• Integer bits = 4
• Fractional bits = 3
581 10 3
Avalon-ST Video
Monitor
• Number of color planes in parallel = 3
• Capture video pixel data = On
1,035 10 0
Avalon-ST Video
Monitor
• Number of color planes in parallel = 3
• Capture video pixel data = Off
479 9 0
Alpha Blending
Mixer
• Number of color planes in parallel = 3
• Number of layers being mixed = 5
• Alpha blending = On
1,324 1 24
Chroma
Resampler
• 4:2:2, number of color planes in parallel
(din) = 2
• 4:4:4, number of color planes in parallel
(dout) = 3
• Horizontal filtering algorithm = Filtered
• Luma adaptive = On
591 0 0
Clipper II
• Number of pixels (color planes) in parallel
= 3
• Clipping method = Rectangle
• Enable runtime control of clipping
parameters = On
402 0 0
Clocked Video
Input
• Number of color planes in parallel = 3
• Sync signals = On separate wires
• Pixel FIFO size = 2048 pixels
• Use control port = On
257 13 0
Clocked Video
Input
• Number of color planes in sequence = 2
• Sync signals = Embedded
• Pixel FIFO size = 2048 pixels
• Use control port = On
317 9 0
1-10 In-System Performance and Resource Guidance
UG-VIPSUITE
2015.05.04
Altera Corporation Video and Image Processing Suite Overview
Send Feedback