Altera Video and Image Processing Suite User Manual

Page 80

Advertising
background image

Parameter

Value

Description

Use control port

On or Off

Turn on to use the optional stop/go control

port.

Table 4-12: Clocked Video Output Parameter Settings

Parameter

Value

Description

Select preset to load

DVI 1080p60

• SDI 1080i60

• SDI 1080p60

• NTSC

• PAL

Select from a list of preset conversions or use

the other fields in the dialog box to set up

custom parameter values. If you click Load

values into controls, the dialog box is initial‐

ized with values for the selected preset

conversion.

Image width/Active pixels

32–65536, Default =

1920

Specify the image width by choosing the

number of active pixels.

Image height/Active lines

32–65536, Default =

1080

Specify the image height by choosing the

number of active lines.

Bits per pixel per color plane

4–20, Default = 8

Select the number of bits per pixel (per color

plane).

Number of color planes

1–4, Default = 3

Select the number of color planes.

Color plane transmission format • Sequence

Parallel

Specify whether to transmit the color planes

in sequence or in parallel.

Allow output of color planes in

sequence

On or Off

Turn on if you want to allow run-time

switching between sequential formats, such as

NTSC, and parallel color plane transmission

formats, such as 1080p. The format is

controlled by the

ModeXControl

registers.

Interlaced video

On or Off

Turn on if you want to use interlaced video. If

you turn on, set the additional Interlaced and

Field 0 parameters.

Sync signals

• Embedded in video

On separate wires

Specify whether to embed the synchroniza‐

tion signal in the video stream or to provide

the synchronization signal on a separate wire.
• Embedded in video: You can set the active

picture line, horizontal blanking, and

vertical blanking values.

• On separate wires: You can set horizontal

and vertical values for sync, front porch,

and back porch.

Active picture line

32–65536, Default = 0 Specify the start of active picture line for

Frame.

UG-VIPSUITE

2015.05.04

Clocked Video Interface Parameter Settings

4-21

Clocked Video Interface IP Cores

Altera Corporation

Send Feedback

Advertising