Follett VERSION 6.00 - Manual (Page 339)

04/04 Chapter 27 Maintaining your collection 339
These instructions change based on the
PHD you choose.
Warning: To protect your equipment,
make sure you turn off your PHD and
computer before connecting or
disconnecting the PHD.
To change the transfer settings,
click Edit.
Choose the field you want to update:
Category, Circulation Type, or Copy Status.
Then select the option you want to assign.
Select the PHD model you're using.
3. Select the PHD model you're using. If you don't need to change the transfer
settings, skip to step 4. Otherwise, choose Edit. The PHD Settings dialog
appears:
Select the port you use to attach your
PHD to your computer, and then...
...select the highest speed available for
that port. The PHD Dolphin+ only comĆ
municates at a speed of 9600 baud.
Set the port and speed for your PHD, and click Save.
4. Once you've selected the correct PHD model and adjusted the PHD settings
as desired, simply follow the instructions displayed on the dialog.
When you click Update, a confirmation message appears. To continue, click
Yes. Once the data transfer process begins, a progress dialog appears. When
the process is complete, close the progress dialog and carefully check the
exception report.