Follett VERSION 6.00 - Manual (Page 656)

04/04 656 Appendices
1. Make certain your PHD is connected to your computer.
2. From the Site tabs in System Setup, select the PHD tab:
If the default port and speed
aren't correct, click Edit and
make the desired changes.
For instructions, see How to
change the PHD settings"
(page 43).
Select the PHD model
you're using.
These instructions
change based on the
PHD you choose.
3. Once you've selected the correct PHD model and adjusted the PHD settings
as desired, simply follow the instructions displayed on the dialog.
A progress dialog appears while the application is transferred to your PHD.
When the process is complete, click Close to return to Site Setup.
Using a Telxon PHD
This section gives you the basic information you need to use a PHD, to enter
keypad commands, and to type or scan barcodes. For instructions on using a