Follett VERSION 6.00 - Manual (Page 388)

04/04 388 Alliance Plus
Before starting Autorecon, make sure no one is adding, updating, or importing
bibliographic records into the library database. This reduces the likelihood that
Alliance Plus will encounter any problems during the process and ensures that
the application checks every bibliographic record in the library database.
1. From the Alliance Plus main window, click Autorecon. The Autorecon
options appear:
The brief and full record ranges are based on the definition you provided in the
Brief Records tab under Cataloging setup in System Setup (see page 54).
2. Select the desired Autorecon process option, and then click Proceed. If you
selected Replace full records or Update full record review sources and
reading/interest levels, a confirmation message appears. To continue, click
Yes. If the last Autorecon you ran was the same process option and was
interrupted, the Autorecon Restart dialog appears:
To start a new Autorecon, click New. Go to step 3.
To restart an interrupted Autorecon where it left off,
click Resume. Go to step 4.
Important: If you want to continue with an interrupted Autorecon, make sure
you select the same Alliance Plus data source that was used during
the interrupted process (see page 382).