Scanteam 3400 ccd, Getting ready – Follett VERSION 6.00 User Manual
Page 700

04/04
700
Appendices
The following scanners will not support the scanning of ISBNs in Circulation Plus
or Catalog Plus, version 4.x or higher:
S
The ScanTeam 3210 CCD scanner and the PSC Quick Laser+ scanner.
If you want to utilize the scanning feature, you will need to upgrade to a
different scanner.
S
PSC Quick Scan Laser+ scanner. If you want to utilize the scanning feature,
you will need to upgrade to a different scanner.
ScanTeam 3400 CCD
Note:
The programming sheet included in this section can only be used with the
ScanTeam 3400 CCD scanner (DOS/WIN/MAC) with certain software
revisions.
Getting ready
Before you start programming the ScanTeam 3400 CCD, you'll need to verify that
you have the correct scanner by doing the following:
1. Determine which scanner you have by viewing the label underneath the
scanner. Item numbers 522022, 522021, 722151, and 722150 are all item
numbers associated with a ScanTeam 3400 CCD Scanner.
2. Determine which software revision is installed in your scanner by viewing
the label underneath the scanner. If you have any of the following revisions,
then you may proceed with the programming of the Scan Team 3400 CCD
scanner. Version: 1.0, 1.1, 3.0, 4.0.4, 4.0.5, 4.0.6, or 4.0.7.
Note:
If you have software revision 4.0.6.2 (DOS/WIN) or 4.0.7.2 (MAC) or
greater, then you will not need to perform this programming. ISBN
scanning is already enabled in scanner(s) with this software revision.