Follett VERSION 6.00 - Manual (Page 43)

04/04 Chapter 2 Setting up your site 43
How to change the PHD settings
If the default port and speed aren't correct for your PHD, from the PHD tab,
choose Edit under PHD Settings. The PHD Settings dialog appears:
Select the port you use to attach your
PHD to your computer, and then...
...select the highest speed available for
that port. The PHD Dolphin+ only comĆ
municates at a speed of 9600 baud.
After selecting the port and speed for your PHD, click Save.
Note: The port and speed settings are saved as the defaults for this workstation
only. You can change a workstation's default settings through any of the
PHD features in the Circulation Plus/Circulation Plus applications.
Maintaining events for Catalog Plus
Entering event notes for specific days throughout the year is like keeping an
event log or notebook of upcoming activities for the library, school, or
community. If you have Catalog Plus, your library patrons can view the events
you maintain in OPAC (see page 410) and with WebCollection Plus (see page
450). However, even if Catalog Plus is not installed, you can still maintain a list of
events for yourself in System Setup.
1. From the Site tabs in System Setup, select Events.
To delete an event,
select the event
and click Delete. At
the message, click
Yes to proceed.
If you want events
deleted after they have
expired, check this box.
Note: This option isn't
available if you have not
installed Circulation Plus.
The number of days an expired
event remains in the system
before being deleted