Follett VERSION 6.00 - Manual (Page 86)

04/04 86 System Setup
Circulation Desk also uses the default annual calendar to automatically create a
new calendar year for you when the due date for a checkout extends into the
coming year for which no calendar has been created.
To set up or change your current calendar, follow these steps:
1. From the Circulation tabs, select the Calendar tab. If a calendar exists for the
current year, the Calendar tab appears. Skip to step 4. If a message appears
informing you that the system was not able to locate the current calendar,
you must set up your default annual calendar. In the warning message,
choose Yes. The Edit New Annual Calendar Defaults dialog appears:
Weekday check boxes
To add a closed day
To remove a closed day
from the default annual
calendar
Closed day selection
list
Note: If you already created a calendar for the current year and then change
the default annual calendar, these changes won't take effect until you
create a calendar for the next year.
2. Select the weekday check boxes for the days you want to close for the entire
year. Make sure that you do not leave any days open for which you have not
defined Open and Close times in the Hours tab. Circulation Desk treats days
without defined hours of operation as if they were closed.
If there are certain dates on which you know the library will always be
closedĊsuch as January 1 or December 25Ċyou can mark them as closed on
the default calendar by closing the individual day. If you want to close an
individual day, choose New. The New Closed Day dialog appears:
3. From the Closed On dropĆdown lists, select the month and the day of the
month. Choose OK to add that date to the list of closed days and return to the
Edit New Annual Calendar Defaults dialog. To add another closed day, click
New in the Edit New Annual Calendar Default dialog, and repeat this step.