IAI America PCON-CA - Manual (Page 157)

Chapter 4 Field Network
POWER CON
PCON-CA/CFA
149
Chapter 4 Field Network
PCON-CA/CFA are applicable for the field networks shown in the list below.
Except for RS485 (Modbus), it is the option which can be selected when purchasing. It cannot be
changed after the product is delivered.
Also, for the field networks other than RS485, PIO cannot be equipped. And Pulse Train Mode
cannot be operated.
Field Network Name Description Details
DeviceNet Refer to the other
ME0256 (Note1)
CC-Link Refer to the other
ME0254 (Note1)
PROFIBUS-DP Refer to the other
ME0258 (Note1)
CompoNet Refer to the other
ME0220 (Note1)
MECHATROLINK Refer to the other
ME0221 (Note1)
EtherCAT Refer to the other
ME0273 (Note1)
EtherNet/IP
Control of the actuator is available with I/O
communication using the control signals
same as those for PIO or the numerical data
communication.
Refer to the other
ME0278 (Note1)
RS485 Actuator is controlled with using a general
protocol “MODBUS” communication.
Refer to the other
ME0162 (Note1)
Note 1 PCON-CA/CFA are the slave units (slave stations). Check the instruction manual of the
master unit of each supplier and PLC to be mounted for the details of each network.
For the instruction of the field network for PCON-CA/CFA, the instruction manual is
provided separately. Use the manual together with this manual.