Bio-Rad ChromLab™ Software User Manual
Page 193
Advertising
Mixer
Instrument Guide
| 191
To change the O-rings
1.
Locate the O-ring in the groove on the mixer base and the mixer barrel
extension (if used).
2.
With your finger, pry the O-ring out of the groove.
3.
Insert the replacement O-ring in the groove.
Note:
If you are using only the mixer body, then only one O-ring is
required. If a mixer barrel extender is used, two O-rings are required.
Advertising
This manual is related to the following products: