Bio-Rad ChromLab™ Software - Manual (Page 94)

3 | Preparing the Instrument
92 | NGC Chromatography Systems and ChromLab Software
NGC Systems Accessories Kit
Each NGC system ships with an accessories kit. The contents of the kit are specific
to the system. Verify the contents against those listed in the sections that follow.
The accessories kits contain the tubing, loops, and fittings necessary to complete
the setup of the shipped configuration. All kits include
 NGC fittings kit
 1 ml syringe
 Luer adaptor
 Fittings tightener
 Touch screen and pivot arm kit
 Tool to attach touch screen
 Pump head wash inlet tubing (2)
 Pump head wash priming line
 1/4-28 union
 System pump inlet tubing (2)
 1 ml sample loop
 Waste tubing (2)
 Injection port
 40 psi backpressure regulator
 Tubing retainers, small (1, for PEEK tubing management)
 Tubing retainers, large (2, for PTFE tubing management)
 Column tubing (2) and fittings (from inject valve to column top and from
column bottom to UV detector inlet)
 Tube #2 (conductivity flow cell to 40 psi backpressure regulator)
 Tube #4 (backpressure regulator to the BioFrac™ fraction collector)