Bio-Rad ChromLab™ Software - Manual (Page 245)

Other Components
Instrument Guide | 243
14. Turn the pivot arm assembly around 180° so that the mounting assembly is now
in your left hand and insert the assembly into its position on the back of the
touch screen.
15. Using the six screws that you removed in step 12, reattach the pivot arm
assembly to the touch screen with a Phillips screwdriver.
16. Reattach the cover to the back of the touch screen with the 7/64 hex key.
17. Pivot the touch screen so that the screen faces forward and the cable
connector is at the bottom of the screen.
18. Slide the touch screen display onto the mounting post.
19. Insert the ¼-20 x ¾" hex bolt underneath the mount to secure the touch
screen.