Bio-Rad ChromLab™ Software - Manual (Page 96)

3 | Preparing the Instrument
94 | NGC Chromatography Systems and ChromLab Software
Preparing the Buffer and Waste Bottles
After you plumb the instrument, prepare buffer and waste bottles.
Buffer Bottles
Place buffer bottles on the bench next to the instrument or in the buffer tray on top
of the instrument. The tray can accommodate up to six 1 L bottles.
Waste Bottles
Place waste bottles on top of the bench or on the floor below the instrument. Ensure
that the waste containers are large enough to hold all buffer that will flow into them.
Empty the waste bottles regularly.
Important: Do not place waste bottles on top of the instrument.