Bio-Rad ChromLab™ Software - Manual (Page 234)

A | Maintaining the Instrument
232 | NGC Chromatography Systems and ChromLab Software
To convert a single-wide bay to a double-wide bay
1. Complete steps 1–5 in the section To replace or reposition modules on the
NGC instruments .
2. Gently lift the divider upward off of the lip to unhook it and then pull it out of the
instrument.
3. Store the divider in a safe place for later use.
4. Complete steps 7–12 in the section To replace or reposition modules on the
NGC instruments .