Bio-Rad ChromLab™ Software User Manual
Page 289
Plumbing NGC Systems
Instrument Guide
| 287
b.
(Optional) Do one of the following:
Connect Tube #4 from port 1 to the Common inlet port on the BioFrac
fraction collector diverter valve.
Connect Waste tubing to port 1 and immerse in a waste container.
c.
Connect outlet tubing to the remaining ports as needed.
2.
If your system has two outlet valves:
a.
Connect tubing from the Out port on the conductivity monitor or pH
monitor to the In port on outlet valve 1 (O1).
b.
(Optional) Do one of the following:
Connect Tube #4 from port 1 on O1 to the Common inlet port on the
BioFrac fraction collector diverter valve.
Connect Waste tubing to port 1 on O1 and immerse in a waste
container.
c.
Connect tubing from port 12 on O1 to the In port on outlet valve 2 (O2).
d.
Connect outlet tubing to all remaining outlet ports as needed.
3.
Immerse the outlet tubing in fraction collection containers.