H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 112)

96
Figure 67 Modifying a Layer 3 physical interface
3. Modify the information about the Layer 3 interface.
The configuration items of modifying the Layer 3 interface are similar to those of creating an
interface.
Table 40 describes configuration items proper to modifying a Layer 3 interface.
4. Click Apply.
Table 40 Configuration items
Item Description
Interface Type Set the interface type, which can be Electrical port, Optical port, or None.
Interface Status
Display and set the interface status.
• The display of Connected indicates that the current status of the interface is up and
connected. You can click Disable to shut down the interface.
• The display of Not connected indicates that the current status of the interface is up
but not connected. You can click Disable to shut down the interface.
• The display of Administratively Down indicates that the interface is shut down by
the administrator. You can click Enable to bring up the interface.
After you click Enable or Disable, the page displaying interface information appears.
IMPORTANT:
For an interface whose status cannot be changed, the Enable or Disable button is not
available.
Working Mode Set the interface to work in bridge mode or router mode.