H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 281)

265
Figure 262 Enabling wireless service
5. Bind an AP radio to a wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. Click the icon corresponding to the wireless service psk.
c. On the page that appears, select the box before ap with radio mode 802.11n(2.4GHz) and
click Bind.
A configuration progress dialog box appears.
d. After the configuration progress is complete, click Close.
Figure 263 Binding an AP radio
6. Enable 802.11n(2.4GHz) radio
a. Select Radio > Radio from the navigation tree.
b. Select the ap box before 802.11n(2.4GHz).
c. Click Enable.
A configuration progress dialog box appears.
d. After the configuration process is complete, click Close.