H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 222)

206
Item Description
HTTP
Enable HTTP
service Specify whether to enable the HTTP service.
The HTTP service is disabled by default.
Port Number
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure that the port is not used by other service.
ACL
Associate the HTTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
HTTPS
Enable HTTPS
service Specify whether to enable the HTTPS service.
The HTTPS service is disabled by default.
Port Number
Set the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, make sure that the port is not used by other service.
ACL
Associate the HTTPS service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
Certificate
Set the local certificate for the HTTPS service. The list displays certificate
subjects.
You can configure the available PKI domains by selecting Authentication >
Certificate Management from the navigation tree at the left side of the
interface. For more information, see "Certificate management."
IMPORTANT:
The service management, portal authentication and local EAP service
modules always reference the same PKI domain. Changing the referenced
PKI domain in any of the three modules also changes that referenced in the
other two modules.