H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 205
189
2.
Enable the DHCP server on VLAN-interface 2: (This operation can be omitted because the DHCP
server is enabled on the interface by default.)
a.
In the Interface Config field, click the
icon of VLAN-interface 2.
b.
Select the Enable option for DHCP Server.
c.
Click Apply.
Figure 171 Enabling the DHCP server on VLAN-interface 2
3.
Configure a dynamic address pool for the DHCP server:
a.
Select the Dynamic option in the Address Pool field (default setting), and click Add.
b.
On the page that appears, enter test for IP Pool Name, enter 10.1.1.0 for IP Address, enter
255.255.255.0 for Mask, enter 10 days 12 hours 0 minutes 0 seconds for Lease Duration, and
enter 10.1.1.1 for Gateway Address.
c.
Click Apply.
Figure 172 Configuring a dynamic address pool for the DHCP server