H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 221)

205
• Defines certificate attribute-based access control policy for the device to control the access right of
the client, in order to further avoid attacks from illegal clients.
Configuring service management
1. Select Network > Service from the navigation tree to enter the service management configuration
page, as shown in
Figure 194 .
Figure 194 Service management
2. Enable or disable various services on the page as described in Table 80 .
3. Click Apply.
Table 80 Configuration items
Item Description
FTP
Enable FTP
service Specify whether to enable the FTP service.
The FTP service is disabled by default.
ACL
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service Specify whether to enable the Telnet service.
The Telnet service is enabled by default.
SSH
Enable SSH
service Specify whether to enable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service
Specify whether to enable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.