H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 333)

317
Figure 339 Configuring a mesh policy
4. Configure the mesh policy as described in Table 106 .
5. Click Apply.
Table 106 Configuration items
Item Description
Mesh Policy Display the name of the created mesh policy.
Link establishment
By default, link initiation is enabled.
IMPORTANT:
• This feature should be disabled when you configure an MP
policy for a rail AP.
• This feature is used on train MPs in subway WLAN mesh
deployment.
Minimum time to hold a link
Set the link hold time.
An active link remains up within the link hold time, even if the link
switch margin is reached. This mechanism is used to avoid
frequent link switch.
Maximum number of links
Set the maximum number of links that an MP can form in a mesh
network.
IMPORTANT:
When configuring mesh, if the number of mesh links configured on
an AP is greater than 2, you need to configure the maximum links
that an MP can form as needed.