Enabling the dhcp server on an interface, Displaying information about assigned ip addresses, Displaying information about assigned ip – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 194: Addresses

Advertising
background image

178

Item Description

Gateway Address

Enter the gateway addresses for the client.
DHCP clients that want to access hosts outside the local subnet

request gateways to forward data. You can specify gateways in
each address pool for clients and the DHCP server will assign

gateway addresses while assigning an IP address to the client.
Up to eight gateways can be specified in a DHCP address pool,

separated by commas.

DNS Server Address

Enter the DNS server addresses for the client.
To allow the client to access a host on the Internet via the host

name, you need to specify DNS server addresses.
Up to eight DNS servers can be specified in a DHCP address

pool, separated by commas.

WINS Server Address

Enter the WINS server addresses for the client.
If b-node is specified for the client, you do not need to specify any

WINS server address.
Up to eight WINS servers can be specified in a DHCP address
pool, separated by commas.

NetBIOS Node Type

Select the NetBIOS node type for the client.

Enabling the DHCP server on an interface

1.

Select Network > DHCP from the navigation tree to enter the default DHCP Server page shown
in

Figure 155

.

2.

Click the

icon next to a specific interface to enter the page shown in

Figure 158

.

3.

Select the Enable option for DHCP Server.

4.

Click Apply.

Figure 158 Configuring a DHCP server interface

Displaying information about assigned IP

addresses

1.

Select Network > DHCP > DHCP Server from the navigation tree to enter the page, as shown

in

Figure 155

.

2.

Click Addresses in Use in the Address In Use field on the lowest part of the page to view
information about the IP address assigned from the address pool.

Advertising