H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 626)

610
Figure 653 Network diagram for stateful failover
Introduction to stateful failover states
The stateful failover states include:
• Silence: Indicates that the device has just started, or is transiting from synchronization state to
independence state.
• Independence: Indicates that the silence timer has expired, but no failover link is established.
• Synchronization: Indicates that the device has completed state negotiation with the other device
and is ready for data backup.
The following figure shows state relations.
Figure 654 Stateful failover state diagram
Configuring stateful failover
1. Select High reliability > Stateful Failover from the navigation tree to enter the stateful failover
configuration page, as shown in
Figure 655 .
2. View the current stateful failover state at the lower part of the page as described in Table 209 .