H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 306
290
a.
Click the Service tab in the IMC management platform.
b.
Select Access Service > Access Device from the navigation tree.
c.
Click Add.
d.
On the page that appears, enter the shared key expert, enter the authentication and
accounting ports 1812 and 1813, select LAN Access Service from the Service Type list, select
H3C from the Access Device Type list, select or manually add an access device with the IP
address 10.18.1.1, and click Apply.
Figure 304 Adding access device
2.
Add service.
a.
Click the Service tab.
b.
Select Access Service > Access Device from the navigation tree.
c.
Click Add.
d.
On the page that appears, set the service name to dot1x, and set the Certificate Type to
EAP-PEAP AuthN and the Certificate Sub Type to MS-CHAPV2 AuthN, and click Apply.