H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 354)

338
Item Description
VLAN
Configure the VLAN to which the roaming group member belongs.
This configuration item is optional.
NOTE:
•
The user profile configurations of the ACs in a roaming group must be the same. For more information,
see "User configuration."
• The ACs in a roaming group cannot be configured as hot backup ACs.
Displaying client information
1. Select Roam > Roam Client from the navigation tree.
Figure 370 Displaying client information
By clicking a target client, you can view the detailed information and roaming information of the client.
The detailed information and roaming information of a client you can view by selecting Roam > Client
Information are the same as those you can view by selecting Summary > Client. For the related
information, see "Summary."
WLAN roaming configuration examples
Intra-AC roaming configuration example
Network requirements
As shown in Figure 371 , an AC has two APs associated and all of them are in VLAN 1. A client is
associated with AP 1. Configure intra-AC roaming so that the client can associate with AP 2 when
roaming to AP 2.